Back to blog

How to Make DIY Pokémon Cards at Home

How to make your own Pokémon cards at home with blank cardstock, paint markers and holographic overlay. Five steps, real photos and the exact supplies we used.

DIY · Screen-free · Kitchen table project

To make your own Pokémon cards, draw them on blank 2.5 × 3.5 inch cardstock with paint markers, let them dry, then press a holographic overlay on top and trim it to the edge. About an hour, four supplies, and the kids design everything.

By Rachel Neill, Figgy co-founder ·November 2026 ·5 min read
Homemade DIY Pokémon cards: a water card and a fire card drawn with paint markers on blank cardstock
Water, level 3. Fire, level 4. Hot Boulder does 50.
Time
About 1 hour
Skill
Easy
Best for
Kids who can write numbers
Mess
Low

Real Pokémon cards cost a fortune, and half of them end up under the couch within a week. So one Wednesday afternoon we skipped the store and made our own.

My son Gavin designed a whole deck of fire and water cards at the kitchen table. He made up the attacks, did the damage math and decided which cards beat which. Then his brother Ben showed up, and the battles went on a lot longer than the crafting did. It was a huge hit.

Here's exactly what we used and how we did it.

What you need

Four things. These are the exact ones we used. As an Amazon Associate I earn from qualifying purchases.

Blank 2.5 by 3.5 inch cardstock for DIY trading cards
Blank card stock

350 GSM, pre-cut to 2.5 × 3.5 inches, the size of a real trading card. Thin paper curls under paint.

Shop on Amazon
Acrylic paint markers in a cup next to homemade trading cards
Paint markers

ARTISTRO acrylic, 24 colors, dual tip. Fine tip for outlines, dot tip for filling in.

Shop on Amazon
Holographic laminate sheet for making DIY Pokémon cards shiny
Holographic overlay

Clear self-adhesive laminate, 8.5 × 11 inch sheets. The part that makes kids lose their minds.

Shop on Amazon
Scissors for trimming holographic overlay on DIY trading cards
Scissors

A sharp pair for trimming the overlay flush to each card.

Shop on Amazon

How to make your own Pokémon cards

Boy drawing homemade Pokémon cards at the kitchen table with paint markers
Gavin at the kitchen table, 4:30 on a Wednesday.
Step 01

Pick a type

Every card needs a type before anything else. Gavin went with fire and water, which gave him built-in rivals. Kids can invent a creature for each card or skip that entirely. Half of his cards are just the type and the stats, and nobody minded.

Tip: Make two or three types at once. Fire, water and grass give kids a rock-paper-scissors loop they can actually battle with.

Finished DIY fire and water Pokémon cards next to a card still being drawn
A finished pair and one in progress.
Step 02

Draw the card layout

Use the fine tip to box out the card. Gavin's layout, top to bottom:

  • Attacks: the type and a stack of attack numbers. Fire 30, fire 40, fire 50, fire 60.
  • Ability: one special move with its own damage, like Hot Boulder 50 or Water Fall 40.
  • Level: a level box (Level 3, Level 4) and the type's symbol at the bottom. A flame, a drop of water.

Kids will argue about the numbers. That's the point. Gavin ranked his cards by level, so a level 4 beats a level 3. He did all the damage math himself, which is more addition than he'd do voluntarily any other day.

Overhead view of a child coloring a homemade trading card with paint markers
Step 03

Color it in and let it dry

Switch to the dot tip to fill in the type symbol and borders. Paint markers lay down a lot of color fast, so even a quick sketch looks finished.

Don't skip this: Give the paint a few minutes to dry before the next step. Wet paint smears under the overlay, and that ends in tears.

Row of finished holographic homemade Pokémon cards on a kitchen counter
The finished deck, ready for battle.
Step 04

Add the holographic layer

Peel the backing off the overlay sheet and press it onto the front of the dry cards. Smooth from the middle out to push out the bubbles. One 8.5 × 11 sheet covers several cards, so do a batch.

Trim the overlay flush to each card's edge. Now the cards are shiny, waterproof and tough enough to survive shuffling.

Step 05

Battle

This part runs itself. Gavin and Ben lined the cards up on the counter, made up rules on the spot and battled until dinner. Then they started a second batch.

Boy laying out his homemade Pokémon cards on the kitchen counter for a battle
Gavin sets up the board.
Boy grinning during a battle with homemade trading cards
Ben, about to win. Rules were invented. Rules were disputed.

Why this craft works

It's screen-free, it's cheap per card, and kids own every part of it: the design, the numbers, the rules. Gavin wasn't copying a card. He was inventing a game. That's the kind of analog play we built Figgy around, and it's a good one to keep in your back pocket for a gray afternoon. More ideas: screen time alternatives that actually work and cabin fever remedies for kids.

After the battle

Give them an arena that isn't the kitchen counter.

Build a card-battle fort out of a Figgy, then turn it into a reading cave, an obstacle course or a couch when the deck goes back in the box. Made in the USA, GREENGUARD Gold certified, 10-year Playproof Warranty, and the covers go in the wash. Here's why fort building is so good for kids.

Shop the Figgy couch
Boy sitting inside a tent built from Figgy play couch pieces in Moonbeam

Questions we get asked

What paper do you use to make Pokémon cards?

Heavy cardstock cut to 2.5 × 3.5 inches, the standard trading card size. We used 350 GSM blank cards that come pre-cut, so there's no measuring.

How do you make homemade Pokémon cards shiny?

Press a clear self-adhesive holographic laminate sheet over the finished card and trim it to the edge. It adds the shimmer and makes the card waterproof.

What markers work best for DIY trading cards?

Acrylic paint markers. They're opaque, so colors stay bright on white cardstock, and a fine tip handles the text while a dot tip fills in color.

How long does it take to make DIY Pokémon cards?

About an hour for a first batch, plus a few minutes for the paint to dry before you add the overlay.

Can you play with homemade Pokémon cards?

Yes, at home. Kids make up their own rules, like higher level wins or highest attack wins. Homemade cards can't be used in official games or tournaments.

Do you own everything in this post?

Yes. Every supply listed is what we used at our kitchen table, and every photo is from that afternoon.

Are the supply links affiliate links?

Yes. The Shop on Amazon buttons are Amazon affiliate links, so I earn a small commission if you buy through them, at no extra cost to you. They're the exact products we used.

Who wrote this

Rachel Neill, Figgy co-founder
Co-founder, Figgy · LinkedIn

Mom of six in Madison, Wisconsin. Rachel co-founded Figgy in 2021 because she couldn't find a play couch that survived her own kids. A University of Pennsylvania graduate and serial entrepreneur, she also founded Anura Connect and is CEO of Carex Consulting Group. Figgy won the Style Meets Play award at the 2026 Golden Grandparent Awards.

Everything she writes here gets tested at her own kitchen table first. More from Rachel: what I've learned raising six kids and running a business.

Keep reading

As an Amazon Associate, Rachel earns from qualifying purchases. Pokémon is a trademark of Nintendo, Creatures Inc. and GAME FREAK inc. Figgy isn't affiliated with or endorsed by them. These are homemade cards for play at home.